[. . . ] If the display indicating the set temperature blinks, contact the After-sales Service. [. . . ] The appliance is normally factory set for operation at a temperature of 12°C. If display A shows only an illuminated dot (stand-by mode), press the On/Off button B 3. The product has an internal light that switches on automatically when the door is opened (models with metal door) or it can be turned on and off when needed by pressing button D located on the control panel (models with glass door) 4. Note: In the event of a power failure, selected functions remain stored in the memory. REPLACING THE BULB (models with glass door) When the bulb is faulty or broken, request a replacement from our authorised personnel (After-Sales Service). D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO 5019 611 01008 Always disconnect the appliance from the power supply before replacing the bulb. When replacing the bulb, bear in mind that this appliance is fitted with a special bulb (15W with bayonet fitting); to replace do not unscrew, but pull towards the inside of the appliance (as indicated by the arrow). Refit the lamp cover and secure it with the screw. Printed in Italy REPLACING THE BULB (models with glass door) 04/09 [. . . ] When replacing the bulb, bear in mind that this appliance is fitted with a special bulb (15W with bayonet fitting); to replace do not unscrew, but pull towards the inside of the appliance (as indicated by the arrow). [. . . ]